Description
All joking aside, this time you will understand how electronic circuits work."I stumbled upon some serious gold" - GeekBeat.tv
"This app takes design to a whole new level of interactivity" - Design News
Build any circuit, tap play button, and watch dynamic voltage, current, and charge animations. This gives you insight into circuit operation like no equation does. While simulation is running, adjust circuit parameters with analog knob, and the circuit responds to your actions in real time. You can even generate an arbitrary input signal with your finger!
That's interactivity and innovation you can't find in best SPICE tools for PC like Multisim, LTspice, OrCad or PSpice (trademarks belong to their respective owners).
EveryCircuit is not just an eye candy. Under the hood it packs custom-built simulation engine optimized for interactive mobile use, serious numerical methods, and realistic device models. In short, Ohm's law, Kirchhoff's current and voltage laws, nonlinear semiconductor device equations, and all the good stuff is there.
Growing library of components gives you freedom to design any analog or digital circuit from a simple voltage divider to transistor-level masterpiece.
Schematic editor features automatic wire routing, and minimalistic user interface. No nonsense, less tapping, more productivity.
Simplicity, innovation, and power, combined with mobility, make EveryCircuit a must-have companion for high school science and physics students, electrical engineering college students, breadboard and printed circuit board (PCB) enthusiasts, and ham radio hobbyists.
Free version has limited sandbox area, but it can still impress you. If you need a larger playground, a full version is available. The full version will employ all of your imagination, and all the screen area of your tablet.
Thanks to Prof. N. Maghari for technical discussions, feedback, and help with designing circuit examples.
Features:
+ Animations of voltage waveforms and current flows
+ Animations of capacitor charges
+ Analog control knob adjusts circuit parameters
+ Automatic wire routing
+ Oscilloscope
+ Seamless DC and transient simulation
+ Single play/pause button controls simulation
+ Saving and loading of circuit schematic
+ Mobile simulation engine built from ground-up
+ Shake the phone to kick-start oscillators
+ Intuitive user interface
+ No Ads
Components:
+ Sources, signal generators
+ Controlled sources (VCVS, VCCS)
+ Resistors, capacitors, inductors, transformers
+ Potentiometer, lamp
+ Switches, SPST, SPDT
+ Diodes, Zener diodes, light emitting diodes (LED)
+ MOS transistors (MOSFET)
+ Bipolar junction transistors (BJT)
+ Ideal operational amplifier (opamp)
+ Digital logic gates, AND, OR, NOT, NAND, NOR, XOR, XNOR
Next:
+ More components
If you like it, please rate, review, and buy!
Joe
Apr 16, 2012 4:17:13 PM
No way to report bugs. This is a very cool piece of software. It is intuitive and easy to use but it still appears to have at least one bug. On my Toshiba Thrive it will close the app for no apparent reason and you can lose recent changes. I thought that this was just a problem with the free version but it happens with the paid version as well. Also, there are some enhancements I would love to suggest such as a power consumption calculation to help with component selection. Being able to communicate with the developer would be a big plus. There is actually an email icon in the interface but when you click on it the To: address is not populated. That being the case, it's hard to see the point of having it.
Shelisha
Apr 16, 2012 1:01:03 AM
Love it It has helped me tremendously with my homework!!!!! I wish the op-amp had more pin out options.
Hans
Apr 15, 2012 2:42:59 PM
Bug The shake feature does not work on a Galaxy S2 with official ICS installed. Please add a button for adding boise.
Rick
Apr 14, 2012 1:06:23 PM
Ricko
dustin
Apr 13, 2012 4:53:18 AM
Very cool
TV
Apr 13, 2012 1:19:00 AM
Great :-) Love it. It does need some more components though.
Francois
Apr 12, 2012 10:38:30 AM
Excellent Worth every cent, bigger workspace would be nice, as well as more features
Jon
Apr 11, 2012 4:27:28 PM
Awesome! This is really great and well worth a five star rating. In order to keep that rating, though, it needs: - - More obvious polarity of capacitors. - Larger workspace area. - More components. - Better management of component connectors. - More components. - Ability to export to share functionality that includes the whole design, not just what's on-screen, although this might be fixed by now. - MORE COMPONENTS :) Really really good app. It's actually my first app on Android that I've not been able to find anywhere else. Kudos. Well worth the money.
Matt
Apr 11, 2012 1:08:27 AM
Excellent. I've had a crash or two (usually when multitasking) but overall this app is excellent. It's a great learning tool.
Blake
Apr 11, 2012 12:25:27 AM
A bit expensive, but worth it! I use the Java applet on the developers web site when on my laptop/desktop. Please keep that applet free! I don't mind paying for the luxury of having this on-the-go. One nice feature to add would be press-and-hold on the icons to show a pop-up label of what the symbol represents. Even including an easily accessible table of icon-label associations would be really helpful for people not familiar with all included circuit components. Thanks!