BabyMonitor supervises noise in a room and calls a specified number if a certain alarm level is reached. Moreover BabyMonitor is able to automatically accept calls from the same number. As a result you are able to perform "control ...Read more
BabyMonitor supervises noise in a room and calls a specified number if a certain alarm level is reached.
Moreover BabyMonitor is able to automatically accept calls from the same number. As a result you are able to perform "control calls".
This app comes for free: No hidden fees, no limitation in features or time. No ads!
Yet another baby monitor app? Well I found a couple of them but either they do not provide enough possibilities to adapt signal level to individual needs or they are extremly huge (3-8 MByes for such a simple application? Unbelievable!) This application has a size of only 23 kByte.
All settings are on one page. Not hidden menus. Play around with the parameters and enjoy. This app was developed, tested and extensively used by parents.
What we do not provide: Sending SMS is not necessary. A ringtone is as good as an SMS an is for free in every case. Playing sounds and images for babys: Responsible parents should be nearby and come over if offspring seems to have a problem.
Tip: keep degrading radiation far from babys. So you better keep your mobile far away and increase "sensitivity".
BabyMonitor automatically sets ringer mode to silent and resets to previous value when stopped.
On some devices "auto answer" feature does not work. Well, bad luck if it does not work on yours. Please do not ask to "fix this bug". There is no solution for this issue!
How it works: Noise is meassure using the internal microphone. Values are miltiplied by a "sensitivity" factor. Result is displayed as noise input "value". Whenever this noise value exceeds half of displayed width it is added to an "alarm level value". Whenever "noise input value" is lower than half of display "alarm level value" is frozen for a while (can be adjusted by "peak hold time"). If noise values still stays below its limit, alarm value is decreased. Whenever "alarm value" exceeds a limit (which is called "threshold", BabyMonitor calls the specified phone number. After a call ends, BabyMonitor sleeps for 0-10 minutes before it again starts this processing noise.
Do you have a question about this app?
UPDATED ON: Sep 9, 2011
INSTALLATIONS: 100,000 - 500,000
LATEST VERSION: 1.2.2
REQUIRED ANDROID VERSION: 2.1 and up
Allows application to access the audio recording path.
change your audio settings
Allows application to modify global audio settings such as volume and routing.
read phone state and identity
Allows the application to access the phone features of the device. An application with this permission can determine the phone number and serial number of this phone, whether a call is active, the number that call is connected to, ect.
modify phone status
Allows the application to control the phone features of the device. An application with this permission can switch networks, turn the phone radio on and off and the like without ever notifying you.
directly call phone numbers
Allows the application to call phone numbers without your intervention. Malicious applications may cause unexpected calls on your phone bill. Note that this does not allow the application to call emergency numbers.
prevent phone from sleeping
Allows an application to prevent the phone from going to sleep.
send sticky broadcast
Allows an application to send sticky broadcasts, which remain after the broadcast ends. Malicious applications can make the phone slow or unstable by causing it to use too much memory.