- Forum posts: 24
Sep 1, 2015, 5:57:32 PM via Website
Sep 1, 2015 5:57:32 PM via Website
The Digitizer, Perhaps The Most Important Part Of The Phone That Makes It Work, If Its Broken You Can Pay Almost 500$ To Have It Fixed By An Store, So Heres How To Fix It,
But First The Digitizer Is The Touch Interface And LCD Protector On A Phone,
What You Need,
Sterile Plastic Gloves
Very Tiny Screwdrivers + and - Heads
Phone Digitizer Replacement
Electronic Epoxy (Clear)
Broken Phone "Duhhhhhh"
1: Shut Down The Device And Remove The Battery, SIM, And SD Card (Put On Gloves)
2: Unscrew The Entire Back Cover
3 Remove The Plastic Pannel Carefully With Flathead
4: Detach The Digitizer Cord From Motherboard (By Detaching Connector Or By Carefully Prying Off The Cord From The Board Unit) (its the cord sticking out)
5: Pry The Digitizer Off The Front Without Damaging The LCD Or Getting The Bonding Glue On It
6: Attach The New Digitizer On The Glue (Or Add More If Needed)
7: Attach The Cords Back By Applying The Cord Back And Connecting It To The Motherboard
8: Reassemble The Device
9: It Should Work Like New If It Dosent Work Make Shure The Cords Are Connected And If It Dont Work (Youre Phone Is Dead Bruh)