Samsung Galaxy Note 4 — NAND Erase ALL to Galaxy note 4

  • Replies:7
  • OpenNot stickiedUnanswered
  • Forum posts: 7

Sep 1, 2016 11:18:39 AM via Website

Hi XDA,

If i use NAND Erase ALL to Galaxy note 4(SM-N910G) while flashing Official ROM via ODIN,
Then what happen?

Is it proper for flashing?

Is there any damage to hardware?

Note : Phone is not rooted

Thanks.

  • Forum posts: 681

Sep 1, 2016 2:13:40 PM via Website

There is a good chance of hard bricking your device.Don't even think about ticking any box except "Auto Reboot" and "F. Reset Time".

NAND can only be marked for totally dead phone with no warranty.

— modified on Sep 1, 2016 2:13:55 PM

Ready To Help You.

  • Forum posts: 7

Sep 1, 2016 3:03:39 PM via Website

Hi Sanjal,

Thanks for your reply.

But i thought that when i use .pit file while flashing it make partitions and after flashing official BL,AP,CP,CSC to my phone it restart some time and when going to "Recovey mode" it goes to first "Installing system updates"(~3 min) every time and then going to recovery menu.

Then i thought that it good to flash all memory and write office BL,AP,AP,CSC via odin.

is it good idea?

Is there any other way to solve this problem?

Please.

Thanks,
kevin

  • Forum posts: 681

Sep 1, 2016 6:36:46 PM via Website

Don't use Pit file, just flash the firmware with odin.
The go to recovery and clear cache then data to remove any conflict with previous version

Ready To Help You.

  • Forum posts: 7

Sep 2, 2016 8:30:17 AM via Website

Hi Sanjal,

I have done this. but again going to same phase.

Is there any other solution to resolve this?

Please help me.

Thanks

  • Forum posts: 7

Sep 2, 2016 8:46:02 AM via Website

HI Sanjal,

When i am flashing AP only via ODIN It gives error: "ODIN: flash write failure".

Please help me out.

Thanks

  • Forum posts: 7

Sep 2, 2016 5:08:48 PM via Website

Hi Sanjal,

I am flashing team win to galaxy note 4 with "Nand erase all " check.(With odin).

My phone is working properly but sometime when i started it display that" Could not do normal boot, ddi: mmc memory failed".

Then i remove battery and again started , then works fine.

Is there any solution for that?

Please help.

  • Forum posts: 681

Sep 3, 2016 7:02:20 AM via Website

Try different version of odin for flashing
If same result then try with the PIT file.(you have to find the right pit file)
or
If your phone boot up again try firmware re-installing using kies
If you have checked all of these and they are OK then may be it looks like an emmc failure

— modified on Sep 3, 2016 7:12:13 AM

Ready To Help You.