Download Odin Tool for Windows and How to Use Odin Flash tool

  • Replies:0
  • OpenNot stickiedUnanswered
  • Forum posts: 3

Jun 12, 2020, 7:10:32 PM via Website

In this post, you are about to download the latest setup of the Odin flash tool. Samsung Odin is the ROM Flashing device for SAMSUNG Android smartphones and tablets gadgets. Counting Samsung Galaxy Note, Samsung Galaxy S10+, and so on.

You can get Latest Odin from our Odin Download devoted page. Need to streak stock firmware, custom recuperation, root bundle on your Samsung telephone? In this post, you can download the Odin Flash instrument for Samsung Galaxy gadgets. All forms of the Odin Tool, including the most recent Odin3 3.13.1 variant is presently accessible for download.

Download Odin Flash Tool

Step 1: Go to Google and Search Download Odin Android Jungles

Step 2: Head to the 1st link which is come from Android Jungles. ( Don't use other links, it might come with malware virus )


How to Use Odin Flash tool to Install Stock Firmware on Samsung Galaxy Devices?

Step 1. Download and install the USB Drivers for your Samsung device on your PC.

Then, Download Odin Tool zip and CF-Auto-Root file and extract both zip or Rar file in the same folder from the above-given link.

Make sure to download the correct one as per the Android Version.

Step 2. Now extract the downloaded file on your PC by using an archive tool.

Step 3. Open the extracted folder "Odin3_Vx.xx.xx".

Step 4. Now double-click on the executable file "Odin3 Vx.xx.xx.exe".

Step 5. If you have launched the earlier versions of Odin, you will be asked to allow "User Account Control" too.

This tool will be launched on your Windows PC automatically.

Step 6. All you have to do is connect your Samsung Galaxy device in Download Mode, select the files, and you are good to go. For this, you will have to switch your phone off.

Then, press the Volume down key and hold it with the Home key. While you are pressing these keys, press and hold the Power Button for a while and release all the three keys when you see ODIN Mode or Download Mode.

Step 7. You will now receive a warning message on your screen of the phone. After that press the Volume Up key to continue or entering Download Mode. Now your phone has entered the downloading Mode.

Step 8. Then Double Click on the Odin.exe file to run the Odin Tool and make sure that"F.Reset Time" and "Auto Reboot" are the only two options ticked.

Now connect your Samsung Galaxy phone with the PC with the help of USB Cable in the Download Mode.

When your phone and PC are connected, Odin Tool will automatically detect your phone and show COM port and display a message in the message box.

Step 9. Now Click on the AP or PDA button in the Odin Tool Window and select the CF-Auto-Root file. When you click on the PDA Button, Odin will ask you the location of the CF-Auto-Root file.

SO, Browse the file and select your CF-Auto-Root file from Odin folder or where ever you have saved the file. Now click on Start Button in the Odin Tool.

Step 10. The root process now starts. This will take a few seconds to root Samsung Devices. You will see a green-colored box in Odin once the process is completed.

Be the first to answer
Recommended articles