Multiple issues with Canvas A1 (AQ4501) (Urgent)

  • Replies:0
  • OpenNot stickiedUnanswered
  • Forum posts: 5

Sep 3, 2016 6:16:01 PM via Website

Hi,

TWRP 2.8.4 and cm-13.0-20160418-SNAPSHOT-ZNH0EAO2NL-sprout4 are compatible for Canvas A1 (AQ4501).
And I downloaded both and put them in C:\Users\Admin\AppData\Local\Android\sdk\platform-tools>

Then I started and I am getting following issues;

C:\Users\Admin\AppData\Local\Android\sdk\platform-tools>

C:\Users\Admin\AppData\Local\Android\sdk\platform-tools>adb reboot bootloader
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
error: no devices/emulators found

C:\Users\Admin\AppData\Local\Android\sdk\platform-tools>fastboot devices
JHFKSHOIER4HBYKJLR fastboot

C:\Users\Admin\AppData\Local\Android\sdk\platform-tools>fastboot oem unlock
...
(bootloader) Start unlock flow

OKAY [ 9.610s]
finished. total time: 9.625s

C:\Users\Admin\AppData\Local\Android\sdk\platform-tools>fastboot flash recovery
twrp-2.8.4.0-m8.img
target reported max download size of 134217728 bytes
sending 'recovery' (16092 KB)...
OKAY [ 0.640s]
writing 'recovery'...
FAILED (remote: size too large)
finished. total time: 0.671s

C:\Users\Admin\AppData\Local\Android\sdk\platform-tools>

I run these commands also:
fastboot flash –S 256M system twrp-2.8.4.0-m8.img and
fastboot -w

After this, whenever I turn on my mobile, I see Micromax Logo with OEM unlocked. And its stuck on the same screen.
If I turn on mobile by Power+Vol.Up, I see black screen with following options ..

Select Boot Mode:
[volume_up to select. Volume_down is ok.]
[Recovery Mode]
[Fastboot Mode]
[Normal Boot]
[Normal Boot +ftrace]
[Normal slub debug off]

If I select Normal Mode, it says, OEM unlocked with Micromax Logo and no further changes.
If I select Recovery Mode, it shows. Please open this link .. bit.do/anderror

I tried to flash Stock ROM. And I followed the steps of links:
firmwarefile.com/micromax-aq4501
androidmtk.com/flash-stock-r...one-flash-tool

According to the steps mentioned in the link, when I click on download, No changes on the ‘Smart Phone Flash Tool’. It just says, Searching and no further changes.

I believe, I can use fastboot commands only. And not able to use any adb commands. In such case which fastboot command can fix it?

Please help me to resolve this issue.

Regards
Ugn10