Description
_▒▓▒_ Light Meter _▒▓▒_▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Professional light intensity (lux) meter for your device.
It measures illumination levels in lux.
Features:
───────
■ direct reading in lux
■ 0 to 1000lux in 2 ranges
■ automatic range change
■ support for neutral filters
■ more range by using filters
■ more range by using dividers
■ 5% max error (device dependent)
■ predefined and custom calibration
■ sensor linearity correction value
■ alternative display in fc (foot-candles)
■ realistic vintage analog look
■ 18 case skins
NOTE:
─────
This app requires devices with a light sensor. It uses native light sensor data acquisition that gives accurate and instant light intensity reading. This type of native data acquisition is available only for:
■ HTC (Hero, Magic, MyTouch, Legend, Desire, Wildfire etc.)
■ Samsung (SGS, SGS2, SGS3, Vibrant, Epic, Captivate, Fascinate, SGTab, Note etc.)
■ Sony Ericsson (SE X8i, X10, XT etc.)
■ Asus (EeePad, Transformer etc.)
Other devices are also supported by the built-in compatibility mode but the accuracy and the speed of light intensity reading may be limited and custom calibration is required for correct reading under compatibility mode.
Also, on some devices the light sensor may not be linear, not continuous and measuring errors will occur or the maximum measuring range may be limited. This is not app's fault.
A Google User
May 11, 2013 10:08:18 AM
Absolute rubbish. Shows the same reading when room light is on or off.
A Google User
Apr 23, 2013 11:03:56 PM
Great Works well
A Google User
Apr 23, 2013 1:08:57 AM
Good troll Professional you say? C'mon. It shows random values, is ugly and has ads. What could be done worse, one may ask? Shame I can't give zero.
A Google User
Apr 17, 2013 12:24:46 AM
Note2 Please, calibration for NOTE 2
A Google User
Mar 25, 2013 8:07:10 PM
Slow Quite good
A Google User
Mar 24, 2013 1:44:09 AM
Cant be sure Doesnt work on HTC Incredible. App or market should test for presence of necessary hardware to prevent downloads to non compatable devices.
A Google User
Mar 20, 2013 10:43:39 PM
Samsung tab2 doesnt work Dunno if its a hardware issue but reading is same whether I cover up camera or shine a light into it
A Google User
Jan 17, 2013 2:08:38 AM
good
A Google User
Jan 6, 2013 9:55:44 AM
Works Showing changing values. Sorry have no way to validate or calibrate.
A Google User
Jan 4, 2013 12:12:53 PM
It works! Good looking and works well. I didn't understand the "predefined and custom calibration" at first - it should be highligted or changed to instruct user to choose his/her phone model from the settings! It could even ask if on the first run. I didn't know S2 (ICS) has a decent light sensor. Another app only displayed values 0, 1, 10, 100 and 1000. Maybe the system uses it like that. This is a great tool!